Infared paint stripping-SPEEDHEATER INFRARED PAINTSTRIPPER | Tensid UK

Professionals and DIYers who invest in their old homes and in their family health, choose our products. They say their expensive, new windows are the only way to improve the energy efficiency of window seals. Field studies compare window replacement to window restoration and prove this is not true! Our Window Restoration Kit is the way hundreds of professional window restoration craftspeople reseal old windows. It softens rock-hard window putty in less than seconds.

Infared paint stripping

Infared paint stripping

Infared paint stripping

Hello all. Thickness of the paint. I cut the aluminum using a miter saw fitted with a non-ferrous metal blade. Some one asked before about removing varnish. Lawrence on Infarde 17th, at am said:.

Spainish town virgin gorda bvi airport. with Scott Sidler

My heat gun has been very effective in removing many layers, even at Infared paint stripping Infard, just very time consuming …and of course there is the Infared paint stripping of heating lead paint. Proven Technology. Proper ventilation is needed when you work inside. The next area can be heated while the first area is being strpiping. Please leave this field empty. The next area can be heated while the first area is being scraped. I would never use any powered sander other than something that Scott describes from festool because of dust control issues. Adding to Cart Some one asked before about removing varnish. Much easier and still protected! Lead paint debris must be thoroughly contained and carefully disposed of. I suggest a full painh, Organic Vapor mask with replaceable filters.

But now there's a relatively painless way!

  • Visit our new Philadelphia, PA distributor : www.
  • Using the right-edged blade to fit surfaces to be stripped cuts down on extra scraper strokes.
  • Professionals and DIYers who invest in their old homes and in their family health, choose our products.
  • I think they all have their place depending on a few things like budget, size of the project, and time.

Professionals and DIYers who invest in their old homes and in their family health, choose our products. They say their expensive, new windows are the only way to improve the energy efficiency of window seals. Field studies compare window replacement to window restoration and prove this is not true! Our Window Restoration Kit is the way hundreds of professional window restoration craftspeople reseal old windows. It softens rock-hard window putty in less than seconds.

The risk of breaking valuable, old glass is extremely low, especially when it is shielded from the infrared rays. Our unique Chisel with Roller quickly takes off the softened putty without damaging adjacent wood.

Our Putty Scraper removes the remaining putty and paint on and under the glass panes. The Boomerang Scraper works fast to clear painted surfaces, grooves, and tight corners. Pull out your window sashes, temporarily cover the wall openings with plywood and plastic sheeting, and move your windows inside to restore them.

You can do this before the winter winds howl and your shivering starts. Get our Window Restoration Kit while the sale lasts. Using the right-edged blade to fit surfaces to be stripped cuts down on extra scraper strokes. The next area can be heated while the first area is being scraped.

Our products are manufactured in Sweden and provide fast, clean, safe, and eco-friendly stripping of old, thick paint and varnish. Example: Yes, I would like to receive emails from Eco-Strip. You can unsubscribe anytime.

Older homes and furniture often feature intricate details and fascinating designs in the wood. Over time, multiple layers of thick paint fill in the grooves and carvings making the designs…. They do not heat the surrounding area.

Heat guns blow super hot air unevenly across a strip only several inches wide. The heat gun has to be in constant motion which makes it difficult to control where and for how long the paint is heated. The high heat penetrates onto the reverse side of the wood and into the materials behind the wood. Undetected from the surface, these can catch fire later after the stripping is done. The infrared rays create heat only in the upper portion of the wood and in the paint.

They are not pushing heated air. The rays do not heat the back side of the wood or behind it. It requires less operator skill to safely monitor the heating. Heat gun operators traditionally use dull putty scrapers. Push scraping at the correct angle with each stroke is difficult.

Reheating and rescraping is often necessary to remove the paint thoroughly. Without experience, it is easy to mar the wood using these common tools. Lead fumes are not created at this low temperature. The wave length is not harmful to the eyes; it is the same as what the embers of an open fire emit. Lead paint debris must be thoroughly contained and carefully disposed of.

For other countries, always follow laws and regulations regarding hazardous waste. Proper ventilation is needed when you work inside. Close all doors and all but one window. Place a window fan in this open window to pull the paint not lead! They quickly heat varnish, oil-based, latex, acrylic, or plastic paint.

They do not work on shellac, milk paint, or stain. It is also effective on metal window bars and sheet metal painted with oil-based paint. On plaster and sheetrock, the paint may soften but the scraping may damage the surface. Please leave this field empty. Join our newsletter list for sale notices. If you are a: Homeowner with thick, old paint, especially pre, lead paint Painter, remodeling contractor, or window restorationist Historic commissioner, architect, or city planner.

You want: A home that is safe for your kids and grandkids and has a lasting paint job An efficient, cost-effective, and worker-safe method to prep a surface for repainting A restoration method that gently brings old, painted wood back to its original beauty.

Buy Now! Is the Speedheater Method safe for people?

Infrared Paint Remover Rated 5. One thing about technique, he made a point to tell people do not give into the temptation to take the heater off of the wood while you scrape and then put it back on. However, sanding the primer is necessary to a smooth finish. I had a piece of newer wood trim catch on fire after just a couple seconds, perhaps because there was a small gap behind it and I created a tiny fireplace? Thank you both. Patrick, shingles are tough to strip.

Infared paint stripping

Infared paint stripping

Infared paint stripping

Infared paint stripping

Infared paint stripping. Description

.

Infrared Paint Removal: Speedheater™ Cobra | The Craftsman Blog

Removing paint or laminate requires time and hard work. Recently I came across an Old House article that discussed a new infrared paint stripper called the Silent Paint Remover. I researched further and the reviews seemed very positive and the theory sound. Apparently, I was not the only one. Basically, an infrared stripper is just 2 quartz heating elements mounted in a reflective case.

I cut the aluminum using a miter saw fitted with a non-ferrous metal blade. However, the narrow strips require very precise hole placement for the screws, especially in the corners.

Using a hand jigsaw with a metal bit, I cut a scrap piece of carbon fiber to act as a heat shield on the top of the case. Instead, I took the 2 small reflectors from the Holmes heater and riveted them together to form a single large reflector.

I then mounted an illuminated power switch and 10 amp fuse to a heat sink that I pulled from a dead computer power supply.

I mounted the heat sink to the top of the frame and added a power cord with a built in GFI that came from a dead Xerox printer. A shot of the mounted handle and wiring.

Next I fastened 2 computer board mounts to both of the bottom rails of the frame to hold the depth screens, which are just cut out from the front of the Holmes heater. Projects Notebook Resources. I started with a Holmes quartz heater. Unfortunately, the heat from the quartz tubes was too much for the thin aluminum.

These green anodized aluminum thumb screws from a computer case are used to adjust the depth. The last thing to go in are the two fragile quartz tubes.

Here is the completed stripper.

Infared paint stripping